|
 |
 |
Best value for your buck |
1/29/2024 |
| I see others have reviewed this barrel and gave it bad marks for accuracy. I have had this barrel on my competition gun since 2021 and it shoots sub 1inch 5shot groups at 50 when I do my part . Try a bunch of different ammo till you find what it likes . For me it’s Norma TAC 22 and SK in the yellow box |
| - Tom B, KS |
| |
 |
2 MOA barrel |
12/24/2022 |
| This is a 3 MOA barrel, with Lapua Midas+ (1.5 inch groups at 50 yards). It shoots other ammunition into larger groups. Borescope inspections shows a multitude rings/ledges throughout the bore’s length. When viewed at 90 degrees, these rings/ledges show gouges in the bore. One land disappears and then reappears. The barrel’s exterior has the noted spiral design, but on those spirals have perpendicular marks: NOT smooth. This barrel was not made well. |
| - John Hearn, GA |
| |
|
Great value |
12/16/2022 |
| This is the second ruger Target barrel I have bought. The first was a blued barrel that shot very well so I ordered a stainless steel one. I think it shoots even better and with a little polishing really shines nice and makes the gun look much nicer than the price to build one. |
| - Ryan D, MN |
| |
|
Great barrel |
12/13/2022 |
| It is a solid clean looking barrel. It did require some fitting on my brand new Ruger receiver. They are slightly larger in diameter than the barrel that came with my rifle. |
| - D Niel, TX |
| |
 |
2 MOA barrel |
12/6/2022 |
| At 1050 total round count, with Lapua Center-X and Midas+, the smallest group at 100 yards was 1.6 MOA. Most groups were over 2 MOA (not inches). 60F degrees, still air, benchrest (front and rear bag supported). |
| GA |
| |
|
Better than a lot of aftermarket barrels |
3/12/2022 |
| This barrel came on a discontinued Target Model I bought at Cabela's. I used it exclusively for long distance silhouette matches up to 200 meters and it was an absolute tack driver. I've gotten away from shooting of the bench and gone to Sporter barrels but I'm keeping this barrel in case I get the urge to do long distance again. |
| - Jack Blackwell, WA |
| |
|
Ruger 10/22 stainless target barrel |
11/15/2021 |
| Very pleased with this barrel.These barrels may or may not be a drop in fit.I had to slightly shave my receiver to get it to go all the way in.This is not the barrel.No two 10/22 receivers are alike.It may require some fitting.It has nothing to do with Rugers quality.Both receiver and barrel are quality parts.Take your time, be patient,You will have great firearm. |
| - william surber, VA |
| |
 |
Target Barrel |
9/21/2021 |
| Great fit and looks good. Ive only fired a hundred rounds through it but it is very accurate. I had mine threaded to accept a suppressor. |
| Jimmy M |
| |
|
One Class Act! |
7/29/2021 |
| I have one of the T models from around 2000 with this Hammer Forged Stainless barrel in the Wood Laminate stock and its quite the treat to shoot as well as being an exceptionally good looking firearm. As was mentioned by others, it gets a LOT of attention when folks see it at the range.
Pro Tip, A little Flitz on a rag and some elbow grease will make it shine like a mirror! |
| - Longtime Rugershooter, PA |
| |
|
S.S. BARREL |
3/20/2021 |
| I BOUGHT THE EARLY TARGET RIFLE. SHOT GREAT OUT OF THE BOX THEN I ADDED SOME OTHER STUFF TO IT WHAT A TACK DRIVER. PEOPLE COME OVER AND ASK ME QUESTIONS ABOUT IT A LOT AT THE RANGE. LOOKS LIKE NOTHING ELSE AROUND... |
| - MIKE S., WA |
| |
|
Bought as part of my target rifle build and it is dead on accurate |
7/9/2020 |
| The first time I saw one of these barrels was when Ruger brought the 10/22 Target model to the market some years ago. I always wanted a super accurate .22 rifle and this was the heart of what I needed to build it. I had a stainless international model which was already a tack driver but adding this barrel made it even more so.The distinctive faceting of the outside of the barrel is very nice looking and I get a lot of compliments on the look it gives to my rifle. This heavy profile barrel is a real plus for both appearance and accuracy. I highly recommend this barrel if you are wanting a super accurate 10/22. |
| - Steve C, MI |
| |
|
Ruger Target SS Barrel |
2/27/2020 |
| I installed this barrel on my 10/22 to be used for long range competition up to 200 yards. The barrel was beautiful, fit perfectly and that rifle can shoot!! |
| David Tenorio |
| |
|
Very Nice |
10/2/2019 |
| Surface finish is unlike any others. If you have watched barrels being processed in a automatic hammer forging machine, you will realize how the spiral pattern is derived. Specular reflections along the spirals are rather pretty to these eyes.
Cant say much on accuracy because I havent shot it yet. |
| Lambo |
| |
|
Finish |
5/26/2019 |
| Barrel finish is very poor. Looks like unfinished hand flat file job. |
| |
|
Beautiful |
12/21/2018 |
| This barrel is accurate and beautiful, especially if you polish it. |
| |
0
WARNING: This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov
